Veermount Technology TeleHawk 3 Installation Manual - page 10
Veermount Technology
Tele
Hawk
3
Installation manual
Page
9
of
14 pages
1 # 123 # 123 # 861864 # 456 # 861865
∗
This sets a new flat number 123 with a door PIN of 123, phone
number 861864, gate PIN of 456 and a second phone number
961965.
1 # 0123 # 456 # 886777
∗
would assign PIN 456 and telephone number 886777 to
key sequence ‘a23’, which is only relevant if extra first-
character keys a-f have been installed.
Change master security code
To change the master security code first dial into the TeleHawk and enter the current security
code as above. Once the unit has responded with the confirming beep key in the new code
required as follows. The code must be between 4 and 6 (four and six) digits long.
To ensure correct change of number the chosen code must be entered twice. Assume it is to
be changed to 4321 then the sequence of programming would be to
- key in
3#0041#4321#4321
∗
Remember the new code - once entered it must be used for future programming.
To complete the programming
If no other programming required - key in
#
∗
This is the same as cancelling a command, but as no command has been keyed in it
terminates the whole programming process. It will also clear down the call in progress.
For more detailed program changes please refer to the Programming manual.
-ooo0ooo-
Ref: Docs/Manuals/TeleHawk3
Issue 2.0 December 06