Verex VeDVR User Manual - Ir Remote Control

21-0421E rev1.1

VeDVR User Guide 

3 

IR Remote Control 

All actions on the front panel can also be done on the remote control. 

Index Name 

Description 

1 

POWER 

Turn device on/off 

2 

DEV 

Enable/Disable IR remote control 

3 

Numeric Keys 

Same as numeric keys of front panel 

4 

EDIT 

Same as EDIT key of front panel 

5 

A 

Same as F3 key of front panel 

6 

REC 

Same as REC key of front panel 

7 

PLAY 

Same as PLAY key of front panel 

8 

INFO 

Same as INFO key of front panel 

9 

VOIP 

Same as [Main/Aux] key of front panel

10 

MENU 

Same as MENU key of front panel 

11 

PREV 

Same as PREV key of front panel 

12 

Direction Keys ENTER 

Same as direction keys and enter key 

of front panel 

13 

PTZ 

Same as PTZ key of front panel 

14 

ESC 

Same as ESC key of front panel 

15 Reserved 

Not 

Used 

16 

F1 

Same as “F1” key of front panel 

17 

Lens control in PTZ mode  IRIS, FOCUS ZOOM for lens control 

18 F2 

Same as ”F2” key of front panel 

IR Remote Control Setup and Configuration 

Loading the batteries into the Remote Control 

1.  Remove the battery cover. 

2.  Insert the batteries.  Make sure the polarity (+ and –) of the batteries is correct.  

3.  Replace the battery cover. 

Using the IR controller 

1.  Press “DEV”.   

2.  Input the DVR Device ID (The default is 88). 

NOTE: Refer to the Display Menu section to program the Device ID. 

3.  Press “ENTER”. The STATUS lamp on the DVR front panel will turn on.  The Remote Control is now ready to be 

used with the DVR. 

Turn off the IR Remote Control 

While the Remote Control status LED is on, press “DEV”. The STATUS LED will turn off. The Remote Control will no 

longer control the DVR. 

Trouble Shooting the Remote Control 

If the Remote Control does not function correctly; 

• 

Ensure the batteries are installed correctly. 

• 

Replace the batteries with new ones. 

• 

Reprogram the Device ID into the Remote Control.