Verex VeDVR User Manual - Network Menu
21-0421E rev1.1
VeDVR User Guide
31
4. Use
“▲”, “▼” to change the selection. Left click the mouse to change the selection.
5. Press “Enter” to use the selection.
Event Playback Selections:
•
Camera. Select All cameras or individual cameras.
•
Event. Select All Events, Alarm only or Mot(ion) Det(ection).
•
Enter a date and time range for the events of interest.
•
Search. Press Search to view the files available for the date and time range.
•
Page No. Displays the number of pages with all files found.
•
File Results Area. Displays the Camera number and Time. Sel is Selected files. Double click on the selected file to
view it in the “Playback area”.
•
Event detail. At the bottom of the Playback area. Displays the file’s type of event and its file size.
•
Save Device. Where to Save the file to.
•
Backup. Backup the file.
Network Menu
The DVR supports TCP, UDP, RTP, and multicast protocols. Remote access to the DVR is provided by 10/100 baseT
Ethernet network connection, PP0E broadband or PSTN narrow band dialup. To remotely access the DVR, the
network selections must be made here.
Highlight the Network icon in the Main Menu and press “ENTER” at the DVR controls, remote control or left click with
a mouse to open the configuration screen.
To make selections in this screen,
1. Use the “◄”, “►”, “▲” and “▼” arrow buttons on the DVR controls or remote control or mouse pointer to high light
the screen selections.
2. Press “EDIT” to change a selection
3. Use
“▲”, “▼” to change the selection. Left click the mouse to change the selection.
4. Press “ENTER” to save a selection and return to the Image Menu.
5. After making changes, press Confirm to save the changes or Cancel to not save the changes.
NIC type
The default is “10M/100M Auto”, the other options are:
•
10M Half-Dup
•
10M Full-Dup
•
100M Half-Dup
•
100M Full-Dup
IP Address
This IP address must not conflict with other IP addresses on the network. If there is a DHCP server on the network,
set the IP to 0.0.0.0, save and reboot the DVR. During the reboot process, the DVR will search for the DHCP server