Verex VeDVR User Manual - Display Menu

12 

VeDVR User Guide 

21-0421E rev1.1

Display Menu 

The Display Menu enables global system selections affecting the video output, menu display and date and time. 

Language 

Select: English, French, Spanish. 

Unit Name 

Assign the DVR a unique name. The default unit name is “DVR”.  

1.  Highlight the Unit Name edit box. 

2.  Press “EDIT” on the DVR controls or the remote control or the left clicked mouse menu. 

Press “F3” on the DVR controls or left clicked mouse menu or “A” on the remote control to 

select the desired keypad functions (Uppercase, Lowercase, Numbers or Symbols). 

3.  Use the DVR or remote control keypad or mouse menu to enter the Unit Name. 

4.  Press “ENTER” on the DVR controls, remote control or mouse menu when finished. 

Device ID 

The Device ID is used to identify the DVR to the IR Remote Control. Set this number from 01 to 255. Set the Device 

ID of the IR Remote Control to the same number. If there are multiple DVR’s in a room, the remote control will control 

all units with the same Device ID. The default is “88” 

1.  Highlight the Device ID field and press the Edit key. 

2. Use 

“▲”, “▼” to change the Device ID. 

3. Press 

“ENTER”. 

Enable Password 

A password is required by default to access the Main Menu. A “9” indicates a password is required and a “x” indicates 

that no password is required. 

Highlight the “Require Password” field and press “ENTER” or “EDIT”. 

Screen Saver 

Set this selection to determine the timeout which controls how long the system menus are displayed after the last user 

activity on the front panel/on-screen display/mouse. Available options are NEVER, 1 Min, 2 Min, 5 Min, 10 Min, 20 Min, 

or 30 Min. 

1.  Highlight the Screen Saver field. 

2. Use 

“▲”, “▼” to cycle through the available options.