Verex VeDVR User Manual - page 19

21-0421E rev1.1

VeDVR User Guide 

11 

Remote Rights (Permissions) 

Remote rights are for operating the DVR from the DVR PC software program.

PTZCtrl 

Remote control PTZ;  

Record 

Remote manual start/stop recording;  

SetPara 

Remote setup the DVR parameters;  

Log 

Remote view the Event log on DVR;  

Utilities 

Remote upgrade firmware, format HDD, reboot DVR and shut down DVR, etc.  

Talk 

Client talks with DVR; 

Alarm 

Remote control DVR alarm output;  

LocalOut 

Remote control DVR video output;  

Com CTRL 

DVR RS-232 transparent channel function.  

User’s (PC) MAC address  

This is the MAC address of the PC that will access the DVR. If the MAC address is used, only the PC with this MAC 

address will be able to access the DVR.  

NOTE:

 If the MAC Address is not known, contact your System Administrator or IT Department. 

Camera Authorization 

Camera channels can be selected individually for the user to do Local Play, Remote Play or Remote Watch. 

Delete Users 

1.  In User Menu, use “▲”, “▼” to select one user, then use “►”, to navigate to the Del button. 

2.  Press ”ENTER”, in the pop-up confirmation dialog, press Confirm to delete the selected user. 

Press Cancel or “ESC” to prevent the user from being deleted.