Verex VeDVR User Manual - page 17

21-0421E rev1.1

VeDVR User Guide 

9 

Add a User 

Default Usernames: 

Default Passwords 

admin 

12345 (all permissions) 

operator 

11111 (Limited Permissions: PTZ Control and Local Play all channels only.) 

investigator 

12121 (Limited Permissions: PTZ and Local Output Control, Local Play all channels only) 

WARNING:

 It is extremely important that default Usernames and default Passwords are changed at the 

time of installation as a security precaution. 

1. Move the cursor to Add and press ENTER. 

2. Press F3 on the DVR controls or left clicked mouse menu or “A” on the remote control to change the number 

keypad to the desired function. (I.e. Number, Uppercase, Lowercase or Symbol). 

3. Set the first username character with the number keypad. The cursor will flash and then go solid indicating the 

character has been accepted and the DVR is ready for the next character. 

4. After the username finished, press ENTER. 

The password for any user can be set or changed while logged in as an Administrator. 

1.  Select the user you would like to set or modify the password for. 

2. Press 

ENTER.