Verint nextiva s17xxe series User Manual - page 58
Index
48
Verint Video Solutions
L
LED, status 19
list of equipment 4
loading default configuration 18
,
21
losing a connection to a camera 19
M
microphone, setting the bias 17
multidrop connection 16
N
network settings 14
O
options, when ordering a device 4
output, alarm or audio 17
P
panel of device 4
–
9
pinout
DB-9 connector 15
serial port 15
port, serial. See serial port.
power connection 12
power requirements 2
power-up conditions 20
protocols supported, serial 15
Q
Quality of Service (QoS) 19
R
reboot 19
red/blue display 19
requirements
computer 12
power 2
Reset button 18
reset to factory default 18
,
21
resolution, video 3
RJ-45 Ethernet cable. See Ethernet cable.
RoHS 52
RS-232 15
RS-422/485 16
S
S1704e-AS panels 5
S1708e panels 6
S1708e-AS panels 6
S1712e panels 7
S1724e panels 9
SConfigurator
configuring the device 12
–
14
console 31
serial connection to access the CLI 31
serial port 15
serial protocols supported 15
shipment list 4
specifications, technical 37
–
39
SSL (Secure Sockets Layer) 2
status LED 19
straight-through Ethernet cable 12
,
34
support, technical viii
system status LED 19
T
technical specifications 37
–
39
technical support viii
Telnet, accessing the CLI 30
temporary IP address 27
ToS (Type of Service) 19
U
updating firmware 18
Utilities CD vii
V
Verint Video Solutions web site vii
video analytics 2
video settings 3
video status LED 20
W
warranty viii
web site, Verint Video Solutions vii