Wacker Neuson 0008954 Operator's manual - Transport To The Worksite

Transport to the worksite

T01091en.fm

17

5.

Transport to the worksite

Requirements:

∗

When transporting the vibrating plate compactor, use only suitable

hoisting gear with a minimum load-bearing capacity of 200 kg.

∗

Always turn off the motor during transportation!

∗

Vertically set guide handle head and lock into place.

∗

Fasten suitable lifting tackle to the central suspension (15) provided.

∗

If you transport the vibrating plate compactor on the cargo area of a

vehicle, strap it down securely at the protective frame (14).

When using the integrated driving mechanism, you must turn off the

engine. If the engine is running, engine lubrication cannot be ensured

in the transport position. This can cause serious engine damage.

There is also a danger that oil may leak out of the engine crankcase

breather.

Note: Also observe the regulations in the chapter Safety

information.