Wacker Neuson 1030L3 Operator's Manual - Safety Information
SV00080en.fm
27
Safety information
4.8.7
Never cut while standing on a ladder (17).
4.8.8
Never work with the cut-off saw on a scaffolding.
4.8.9
Do not bend too far forward when working. Always use your knees to
lift or put down the cut-off saw. Do not bend down from the waist.
4.8.10 When moving the cut-off saw, ensure that none of your body parts is
in the extended swing area of the cutting blade (18).
4.8.11 Cutting blades must only be used to cut materials they were designed
for.
4.8.12 Do not use the cut-off saw to lift or shovel workpiece scraps or other
objects out of the way.
Caution, risk of injury! Before beginning the cutting process, remove
objects such as stones, nails, etc. from the cut area. Such objects can
be flung away and cause injuries.
4.8.13 When cutting workpieces to length, use a secure support and, if nec-
essary, secure them so they cannot slide away. Do not use your foot
to hold the workpiece down. Do not allow another person to hold the
workpiece down.
4.8.14 Round workpieces must be secured so they do not rotate during the
cutting process.
4.8.15 Guide the cut-off saw by hand only if necessary with the cutting attach-
ment in the outer position. A cut-off saw with the cutting attachment in
the center position has a better center of gravity, which helps prevent
early fatigue.
4.9
Instructions for using synthetic resin cutting blades
NOTICE!
4.9.1
Synthetic resin cutting blades can absorb moisture. When the cutting
blade rotates quickly, the absorption of moisture causes eccentric
weight distribution. The eccentric weight can break the blade.
4.9.2
Do not cool synthetic resin cutting blades with water or another liquid.
18