Wacker Neuson 1030L3 Operator's Manual - Starting Up
Manual is about: Gasoline cut-off saw
of
76
T01126en.fm
47
Starting up
7.5
Filling the tank
NOTICE: STRICTLY FOLLOW THE SAFETY INFORMATION!
Fuels must be handled carefully and prudently.
Only when the engine is turned off and has cooled down!
Clean the filling area so that no dirt can get into the tank.
Set the machine on its side on a flat base.
Screw off the tank cap and pour in the fuel mixture. Pour it in carefully
to avoid spilling the fuel mixture.
Tightly screw the tank cap back on.
Clean the tank cap and surrounding area after you are finished! Never
start or operate the unit at the location where you filled the tank! Should
you spill fuel on your clothing, change your clothes immediately.
Fuel mixture
38