Wacker Neuson BTS 1030L3 Operator's Manual - Putting Into Operation
Other manuals for BTS 1030L3:
Operator's Manual
Manual is about: Gasoline cut-off saw
of
72
Putting into operation
T00962GB
36
7.
Putting into operation
ATTENTION:
Always turn off the engine and pull off the spark plug
cap before doing any work on the cut-off saw! Always
wear protective gloves!
ATTENTIONE:
Start the cut-off saw only after complete assembly and
inspection.
For the the following work, use the assembly tools included with
delivery:
Place the cut-off saw on a stable surface and carry out the following
assembly steps:
30
1.13/19 AF universal wrench
2. Allen key
3. Carburetor adjustment
screwdriver
1
2
3
31