Wacker Neuson BTS 1030L3 Operator's Manual - Maintenance

Maintenance

T00963GB

51

8.5

Replacing the spark plug

ATTENCION:

Do not touch the spark plug or plug cap if the engine is running

(high voltage).

Switch off the engine before starting any maintenance work.

A hot engine can cause burns. Wear protective gloves!

The spark plug must be replaced in case of damage to the insulator,

electrode erosion (burn) or if the electrodes are very dirty or oily.

ATTENCION: Use only BOSCH WSR 6F spark plug, CHAMPION

RCJ-6Y or NGK BPMR 7A.

The use of a non-approved spark plug may result in damage to the

ignition system.

Turn the cover lock (6) to the “Unlocked

“ position and carefully

remove the filter cover (7).

Flip up spark plug cover (8). Pull plug cap (9) off spark plug. Remove

spark plug only by using universal wrench delivered with machine.

Electrode gap

The electrode gap must be 0.5 mm (0,020“).

57