Wacker Neuson BTS 1030L3 Operator's Manual - Maintenance
Other manuals for BTS 1030L3:
Operator's Manual
Manual is about: Gasoline cut-off saw
of
72
Maintenance
T00963GB
52
8.6
Checking the ignition spark
Insert the combination wrench (9) between the hood and cylinder only
as shown.
ATTENCION!
Do not insert the combination tool into the spark plug hole, but make
contact only with the cylinder (otherwise you may damage the engine).
Using insulated pliers, hold the spark plug (10) (unscrewed but with the
plug cap on) against the combination tool (away from the spark plug
hole!).
Switch the combination switch (11) to “I“.
Pull the starter rope hard.
If the function is correct, an ignition spark must be visible near the
electrodes.
58