Wacker Neuson EH 23 Low Vib Operator's Manual - page 19
Manual is about: Electric hammer
of
50
EH 23, 27
Safety
19
Disconnecting the machine from the electric power supply
Before carrying out service or maintenance work, pull the plug out of the plug re-
ceptacle in order to disconnect the machine from the electric power supply.
Cleaning
Always keep the machine clean and be sure to clean it each time you have fin-
ished using it.
Do not use gasoline or solvents. Danger of explosion!
Do not use high pressure washers. Permeating water can damage the machine.
When electrical equipment is present, this can pose a serious injury risk from
electric shocks.
Cleaning the zerk fitting
Wipe the zerk fitting with a clean cloth after the lubrication of the machine. There
is a danger of electrocution if there is excessive grease on the zerk fitting.