Wacker Neuson EH 23 Low Vib Operator's Manual - page 35
Manual is about: Electric hammer
of
50
EH 23, 27
Troubleshooting
35
9
Troubleshooting
Potential faults, their causes and remedies can be found in the following table.
Malfunction
Cause
Remedy
Machine not in operation.
Power cable interrupted.
Check power cable, have it re-
placed if defective. *
* Have these tasks carried out by the service department of your Wacker Neuson contact person.
Carbon brushes worn.
Have carbon brushes
replaces. *
Machine cuts out.
Carbon brushes worn.