Wacker Neuson EH 23 Low Vib Operator's Manual - page 38
Manual is about: Electric hammer
of
50
Accessories
EH 23, 27
38
Placing hammer on the truck
1. Switch off the machine.
2. Remove tool from the tool holder.
3. Clean the truck's guide rod.
4. Insert hammer with the tool holder on the guide rod and rest on the handles
of the truck.
5. Insert tool in tool holder.
CAUTION
Insufficient stability of the truck.
Injury or damage caused by the truck tipping over or rolling off when the ham-
mer is placed on it.
f Place truck on a level surface.
f Secure truck against rolling off and tipping over.