Wacker Neuson EH 23 Low Vib Operator's Manual - page 29
EH 23, 27
Operation
29
Breaking off material
1. Place the hammer on the material to be broken off.
2. Press the ON/OFF switch.
Note: When the ON/OFF switch is pressed, the machine starts to run at full
speed immediately.
Work tips
When working, use the weight of the hammer.
Pressing forcefully against the material to be worked on does not improve the
machine's performance.
Press the machine against the material to be worked as follows:
Apply at least 100 N pressure.
Press with sufficient strength that the machine noticeably locks into place.
Apply somewhat less pressure as soon as you feel the lower stop.
WARNING
Injuries from insufficiently guided or uncontrolled machine.
f Always hold machine with both hands and stand firmly.
Item
Designation
1
ON/OFF switch