Wacker Neuson EH 23 Low Vib Operator's Manual - page 33
Manual is about: Electric hammer
of
50
EH 23, 27
Maintenance
33
Lubricating the machine
1. Remove any dirt around the zerk fitting.
2. Place filled manual grease gun onto the zerk fitting and operate approx.
20 times.
Note: Only use special lubricants for lubricating, see chapter Technical Data.
3. Wipe the area around the zerk fitting with a clean cloth.
WARNING
Excessive grease can conduct electricity.
Injuries from electrocution.
f Position the grease gun so that no excess grease is spread in the equip-
ment.
f Wipe off excessive grease.
Item
Designation
1
Zerk fitting