Wacker Neuson RCE Operator's Manual - page 23
of
56
RCE
Description
Operator’s manual
23
5.3
Components and operator's controls
ON/OFF switch
Switching on the machine
Turn on the machine with the ON/OFF switch. As long as the ON/OFF switch is
pressed, the machine runs in cutting operation.
Switching off the machine
If the ON/OFF switch is released, the motor stops. The movable knife stops in
the current position.
Item
Designation
1
ON/OFF switch
2
Oil filler neck
3
Pressure release screw
4
Stop screw
5
Cutting head
Protective hood (without
illustration)