Wacker Neuson RCE Operator's Manual - page 35
of
56
RCE
Maintenance
Operator’s manual
35
Changing the movable knife
Performing preparations
1. Bring the movable knife in the position in which the fastening screw of the
knife and the hole in the cutting head are in aligned. For this press the ON/
OFF switch.
2. Pull the plug from the plug receptacle.
3. Open the protective hood (only installed on some machine designs).
Changing the movable knife
1. Screw out the fastening screw.
2. Changing movable knife.
3. Tighten the movable knife with the fastening screw.
Item
Designation
1
Movable knife
2
Fastening screw