Wacker Neuson RCE Operator's Manual - page 31
of
56
RCE
Operation
Operator’s manual
31
5. Press and hold ON/OFF switch.
6. If the knife again is in the original position, release the ON/OFF switch.
7.4
Decomissioning
Switching off the machine
1. Release ON/OFF switch.
2. Pull the plug from the plug receptacle.
Cleaning the machine
1. Free the cutting head of cutting residues with suitable tools.
2. Wipe the housing with a damp and clean cloth.
CAUTION
Electrical voltage.
Danger of electrocution!
f Make sure when cleaning that no water gets into the machine. Do not clean
machine under running water or with a high pressure cleaner.