Waldorf FN8127E Installation And Operation Manual - page 16
14
Operation
Operation of the Appliance
FN8127E and FN8224E Models Only.
1.
Turn ‘ON’ mains power at the mains supply.
2.
Turn ‘ON’ mains isolator switch located behind the front access door. Green neon indicator will
illuminate to indicate that there is mains power to the fryer.
3.
Set the tank control thermostat to the temperature required. Orange neon indicator will illuminate
to indicate that the heating elements are ‘On’.
4.
When oil in tank reaches the set temperature, Orange neon will extinguish to indicate that fryer is up
to the selected temperature.
5.
To turn ‘OFF’ the fryer, open the front access door and turn the mains Isolator Switch to the ‘OFF’
position.
6.
Turn ‘OFF’ mains power at mains supply.
T
HE
OPERATOR
MUST
TAKE
GREAT
CARE
TO
USE
THE
EQUIPMENT
SAFELY
AND
TO
GUARD
IT
AGAINST
THE
RISK
OF
FIRE
.
DO NOT
LEAVE
THE
FRYER
UN
-
ATTENDED
DURING
OPERATION
.
DO NOT
REPLENISH
THE
OIL
(
FRYING
MEDIUM
)
IN
THE
FRYER
WHEN
THE
FRYER
IS
HOT.
DO NOT
OVER
FILL
THE
OIL
(
FRYING
MEDIUM
)
IN
THE
FRYER
ABOVE
THE
TOP
LEVEL
MARK
.
DO NOT
ALLOW
THE
OIL
(
FRYING
MEDIUM
)
IN
THE
FRYER
TO
FALL
BELOW
THE
LOWER
LEVEL
MARK
.
DO NOT
ALLOW
THE
OIL
(
FRYING
MEDIUM
)
IN
THE
FRYER
TO
OVERHEAT
.
DO NOT
INTRODUCE
WET
FOOD
OR
WATER
INTO
THE
HOT
OIL
(
FRYING
MEDIUM
).
DO NOT
USE
FLAMMIBLE
SOLVENTS
AND
CLEANING
AIDS
ON
OR
IN
CLOSE
PROXIMITY
TO
THE
FRYER
WHILST
THE
FRYER
IS
STILL
HOT.
Warning