Waldorf FN8127E Installation And Operation Manual - page 6
4
Specifications
Model Numbers Covered in this Specification
FN[1]8127E
'Fast-Fri' Electric Fryer, Manual Control
(Single Tank - 27ltr, 17kW).
FN[1]8127EE
'Fast-Fri' Electric Fryer, Digital Control
(Single Tank - 27ltr, 17kW).
FN[1]8127E21
'Fast-Fri' Electric Fryer, Manual Control
(Single Tank - 27ltr, 21kW).
FN[1]8127EE21
'Fast-Fri' Electric Fryer, Digital Control
(Single Tank - 27ltr, 21kW).
FN[1]8224E
'Fast-Fri' Electric Fryer, Manual Control
(Twin Tank - 24 ltr, 17kW).
FN[1]8224EE
'Fast-Fri' Electric Fryer, Digital Control
(Twin Tank - 24 ltr, 17kW).
NOTE:
[1]: -
- Standard Back Models.
L
- Low Back Models.
Electrical Supply Requirements
Electrical Connection
When connecting a this electric appliance to the mains supply, ensure that the following is carried out:-
The supply cord shall not be lighter than ordinary tough rubber sheathed (oil
resistant) cord. e.g. H05 RN-F with sufficient current carrying capacity cable sizes.
The branch supply line shall be overload protected.
The point of connection shall be as close as practicable to the appliance have an
isolating switch accessible during manual operation of the appliance.
The supply cord shall be protected against any mechanical or thermal damage.
Refer to the appropriate wiring standards for the size of cable that is to be supplied to an appliance for the
current drawn on that line.
Model
Power Supply
Total Power
Input
Amps
Voltage
Type
Frequency
L1
L2
L3
FN8127E / EE
400-415Vac
3 P+N+E
50 / 60Hz
17kW
23.6
23.6
23.6
FN8127E21 / EE21
400-415Vac
3 P+N+E
50 / 60Hz
21kW
29.2
29.26
29.2
FN8224E / EE
400-415Vac
3 P+N+E
50 / 60Hz
17kW
23.6
23.6
23.6
T
HIS
APPLIANCE
MUST
BE
EARTHED
. I
F
SUPPLY
CORD
IS
DAMAGED
,
IT
MUST
BE
REPLACED
BY
A
SUITABLY
QUALIFIED
PERSON
IN
ORDER
TO
AVOID
A
HAZARD
.
Warning