WANDERS STEALTH - SCHEMATICS Instructions For Use Intallation Manual - Operating Instructions
10
BUTTON A
BUTTON B
Open the gas tap, which is placed in the gas supply tube. Turn the ignition button –
A- against the direction of the clock, as far as you can. Then press and wait several
seconds. From the pressed position turn to the lefty until a click can be heard.
Looking through the glass from the left side, you can tell if the pilot light is
burning. If this is not the case , you should repeat these actions.
If the pilot light is burning, keep the ignition button pressed for 30 seconds. After
releasing, the flame should stay alive.
Then, turn button –A- further to the left and put on the position of the big flame.
Button –B- can now be switched to the desired position, by means of the remote
control.
You will learn by experience which position is best for your living room. Use of
the remote control is easy. Use button -D- to make the flames higher and button -E-
to lower or extinguish the flames.
Switching off the main burner
:
Press button -E- on the remote control, until the lamp on the receiver starts to blink.
The burner can also be switched off, by turning the ignition button –A- to the right,
until you can turn no further.
OPERATING INSTRUCTIONS
In the middle of the stove, behind the lid, you will find the control buttons