WATT AGE Lite Stik Assembly Manual
Lite Stik
Electric Powered
Radio Control
Flying Model
Assembly Manual
The “Stik” has a long history in model aviation. Almost every conceivable Stik creation has been
made. The latest in the Stik saga is the Wattage Lite Stik. Wattage wants to get you flying anywhere,
even in a school gymnasium. The Lite Stik will fly almost anywhere (as long as there’s little or no
wind), schoolyard, auditorium, or even the cul-de-sac! Its light weight and low wing loading make it
the perfect fly-it-anywhere plane. We think you’ll find the Lite Stik easy to build, easy to fly, and just
plain fun. Please take the time to read this manual thoroughly before beginning assembly. You’ll have
your Lite Stik assembled in just a few hours and be ready to fly places you never before thought
possible.
1
o)
Hobby Knife
o)
Pen
o)
Builder’s Triangle (If your Triangle does not have a
ruler, you will also need a ruler.)
o)
Needle Nose Pliers
o)
Wire Cutters
Tools and Supplies Needed
Items Needed (Not included in kit)
o)
3 Channel Radio (Hitec Focus 3FM Shown)
o)
Micro Receiver (Hitec Feather Shown Note: other
receivers like the Hitec 3Ch AM receiver will work with
the case removed. Receiver should be under 1/2 oz.)
o)
Micro Servos (Cirrus CS 10 .19 oz servos)
o)
Speed control for 180 motors with BEC and Auto
cut-off. Wattage IC-55 shown.
o)
Flat 6 or 7 cell 50 to 150 Nicad battery pack. Watt-
age 6 cell shown.
o)
Appropriate battery charger for the flight battery. The
Promax Activator is an AC/DC input, versatile charger.