WATT AGE Lite Stik Assembly Manual - page 7
7
Where to Fly and Pre-Flight Check
Do not fly near powerlines, obstacles, or around
people. The Lite Stick is not a toy and can cause
harm or injury.
The Lite Stick can be flown in very small areas and
even in a gynmasium or aircraft hanger. Try short
flights and practice before flying in tight areas or
around other people.
Do not fly if it is windy. Pick a calm day for your
first flights. Attach a 8 inch long, by 1 inch wide
piece of ribbon to your antenna with string. If the
wind blows it out more than 30 degrees from the
antenna, the wind is blowing too hard.
Properly charge your transmitter and flight batter-
ies. Weak batteries cause crashes.
Double check control movement direction and
throws.
Range test the radio before your first flight. Per-
form power-on range tests before your first flight.
Throw the Stik with the wings level (from right
to left.) The fuselage should be level to the
ground. Apply power just before launch. After
launch, maintain level flight for 20 - 40 feet to
build up airspeed.
Always launch into the wing and do not fly in
wind. For your first few flights, fly the Lite Stik
in calm weather to prevent accidents until you
become familiar with the model.
Launching
ok
Hold Plane Level
Telling us what you like and don't like determines what model kits we make and how we make them. We would appreciate it if you would take a few
minutes of your time to answer the following questions about this kit. Simply fold this form on the dotted lines, seal with tape and mail it to us. Do not
use staples and make sure our address faces out.
1)
Kit: Wattage Lite Stik
2)
Where did you learn about this kit?
q
Magazine Ads
q
Friend
q
Hobby Shop
q
Other
q
Internet
3)
What influenced you the most to buy this kit?
q
Magazine Ads
q
Price
q
Type of Model
q
Box Art
q
Recommendation
q
Other
q
Internet
4)
Did you have any trouble understanding the
written instructions?
q
Yes
q
No
5)
Did you have any trouble understanding any of
the photographs.
q
Yes
q
No
6)
Were any of the kit parts:
q
Damaged
q
Wrong Size
q
Missing
q
Wrong Shape
If you checked any of the boxes above, did you
contact our Customer Service Department to re solve the problem?
q
Yes
q
No
7)
Was any of the assembly difficult for you?
q
Yes
q
No
8)
What did you like most about this kit?
q
Assembly Manual
q
Parts Fit
q
Hardware Supplied
q
Price
q
Other
9)
What did you like least about this kit?
q
Assembly Manual
q
Parts Fit
q
Hardware Supplied
q
Price
10)
Are you satisfied with the finished model?
q
Yes
q
No
11)
How does this kit compare to similar kits by
other manufacturers?
q
Better Than
q
As Good
q
Not as Good
Additional Comments:
_________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
Product Evaluation