Wavecom TnP-500 User Manual - page 28
Wavecom Instruments Fully Integrated Test N Print Unit - User Manual
28
Change Label Options settings
Changing the label options changes the way the printer behaves or how the tag is printed. When selecting this option you
will be prompted with 3 different options. Enable / Disable, choosing a label set and modify the due date.
Enable / Disable
Selecting this option will enable or disable the tag information being sent to the zebra printer. The printer can also be disabled
by switching the printer off from the power switch located on the side of the printer. Once the printer is switched back on it
will not print out the records that were created while the printer was switched off.
Press the
key to disable.
Press the
key to enable.
Choose Label Set:
If you have more than one logo in the printer’s memory (multiple company logos) this function will allow you to select the
various logos. If you have one logo stored in the printer then you only need to choose Label 1. If you choose anything else a
blank tag will be created. If you have multiple logos then the next one to choose would be label1 and so on. If you are unsure
which one to choose select the Label 0.
Read the onscreen message and then press the
key.
Press the
key to increase the label number.
Press the
key to decrease the label number.
Press the
key to select the displayed label number.
Customise Next Test Due Dates
Enabling this feature will allow customise next test due dates when testing equipment. When this feature is disabled (default
setting) the next test due date is determined by the test date plus the frequency of test. When enabled a custom date can be
set after visual test in TnP models.
Press the
key to enable.
Press the
key to disable.
Stop Labels Spooling On Power On
If the printer is spooling tags on power on then it has reverted back to the factory default settings. To stop this choose the F3
key when prompted. The printer must be switched on and have a solid green light. If not, the printer won't receive the
command.
Press the
key to enable.
Press the
key to disable.
Change Barcode Options settings
Barcode options refers to modifying the auto generate barcode function. The barcode options can be selected in two ways.
Either holding F3 down when on the new barcode screen or by the TnP options menu. Both have the same menu options
expect when entering barcode options VIA TnP options. These menu options are: