Wavetronix smartsensor advance User Manual - Mounting The Backplate

24 

CHAPTER 2  •CONNECTING POWER AND SURGE PROTECTION

Figure 2.1 – Intersection Preassembled Backplate

Please refer to the Click quick-reference guides for more comprehensive product instruc-

tions. Chapter 12 contains information on how Click products make the sensor compatible 

with all standard control cabinets.

A pinout diagram showing the sensor cable’s pin-out and appropriate connection points 

can be found in Appendix A of this document.

Mounting the Backplate

Use the following steps to mount the backplate in the traffic cabinet:

1  Locate the area planned for mounting the backplate. The backplate can usually be 

mounted on the side panel of a NEMA-style cabinet. 

2  Attach the backplate with the U-channel mounting screws. 

Note

If you have a 330 series (170/2070 style cabinet) with a 19-inch EIA rack, please con-

tact Wavetronix Technical Services for assistance. Wavetronix can provide modified 

backplates that attach to a 19-inch rack.

Connecting AC Power

Since SmartSensor Advance operates on 10–28 VDC, the intersection preassembled back-

plates provide an AC power conversion option. The backplate includes an AC to DC power 

converter, power surge and circuit breaker.