Wavetronix smartsensor advance User Manual - page 39
38
CHAPTER 3 •INSTALLING SMARTSENSOR MANAGER ADVANCE
Use these steps to install SSMA on a handheld computer running Windows Mobile:
1 Ensure the handheld computer is connected to the PC and synced.
2 Click on the SSM Advance v3 Setup.exe file to run the setup program on the host
computer. The SSMA Setup Wizard will automatically check the host computer to see
if Microsoft ActiveSync (Windows XP and older) or Windows Mobile Device Center
(Windows Vista) is installed. These are programs that are used to communicate with a
handheld device. If one of these programs is found, the option of installing SSMA to
a Pocket PC device will become available.
3 Click the Pocket PC checkbox and then the Next>> button to install SSMA on a con-
nected Pocket PC device (see Figure 3.4). If both the Computer and Pocket PC boxes
are checked, the setup program will first install the SSMA software to the computer.
Figure 3.4 – Pocket PC Installation Program
4 Click Continue>> to start the Pocket PC installation process (see Figure 3.5). The
setup program runs the Add/Remove Programs application for Windows handheld
devices. If a Pocket PC device is connected to the computer, Add/Remove Programs
will immediately begin installing SSMA on the Pocket PC device. If a Pocket PC
device is not connected to the computer, SSMA will be downloaded the next time a
Pocket PC device is connected to the computer.
Figure 3.5 – Adding SSMA to a Pocket PC
5 Click OK once the download is complete.