Wavetronix smartsensor advance User Manual - page 51
50
CHAPTER 4 •COMMUNICATION
Figure 4.16 – Sensor Firmware Downgrade
The most recent version of SSMA can be obtained from the Wavetronix website (www.
wavetronix.com) under the Support tab.
Converting Detection Zones from Previous Software Versions
Previous versions of the SSMA software supported 8 zones. SSMA version 2.0 and later
supports 128 zones (8 channels, 4 alerts per channel and 4 zones per alert).
During the firmware upgrade process, SSMA will determine if the sensor is running any
previous versions. If this is the case, the SSMA software will display a message asking
you to convert the configuration. If you choose to convert the configuration, the SSMA
software will create a new configuration out of the previous existing configuration; if you
choose NOT to convert, a default configuration will be created.