Wavetronix smartsensor advance User Manual - page 73
72
CHAPTER 7 •CHANNELS-ALERTS-ZONES
Channel 1
Alert 1
Zone
1
Alert 2
Alert 3
Alert 4
Zone
2
Zone
3
Zone
4
Zone
4
Zone
3
Zone
2
Zone
1
Zone
1
Zone
2
Zone
3
Zone
4
Zone
1
Zone
2
Zone
3
Zone
4
Figure 7.8 – Normal Channel Hierarchy
The CAZ Setup screen below shows a tabbed view of each detection channel and its as-
sociated alerts and zones (see Figure 7.9). The eight tabs at the top of the screen represent
the sensor’s eight channels, with the selected tab showing the channel number and channel
name; the middle portion of the screen contains alert configuration parameters; and the
lower portion of the screen contains zone configuration parameters.
Channels
Alerts
Zones
Figure 7.9 – Setup Channels-Alerts-Zones Screen
The OK, Undo and Cancel buttons pertain to ALL changes made in the CAZ Setup job
and not to individual channels, alerts or zones. The OK button saves the settings to the
sensor; the Undo button restores the settings to the screen’s initial values; and the Cancel
button closes the screen without saving any changes.