Wavetronix smartsensor advance User Manual - 3. Manual Radar Adjustment

CHAPTER 6  •  SENSOR CONFIGURATION 

59

˽

Range – Shows the distance from the stop bar.

˽

Speed – Shows the speed.

˽

Estimated Time of Arrival – Shows the estimated time it will take to arrive at the stop 

bar.

˽

Tracker ID – Shows the ID number for each tracker.

˽

Blank – (no tracker data shown)

˽

Disabled – (no tracker shown)

3. Manual Radar Adjustment

The Manual Radar Adjustment screen is used to fine-tune the results of the automatic 

radar configuration process (see Figure 6.5).

Figure 6.5 – Manual Radar Adjustment Screen for Advance (left) 

 and Advance Extended Range (right)

Note

The ranges displayed in the Manual Radar Adjustment window will depend upon 

whether you have SmartSensor Advance or SmartSensor Advance Extended Range. 

The scale on the right side of the road view indicates the ranges. The SmartSensor 

Advance has 5-ft increments up to 600 ft, and the SmartSensor Advance Extended 

Range has 7.5-ft increments up to 900 ft.

You will notice in the button tray at the bottom of the window (see Figure 6.5) there is a 

Reboot button (green power button icon). When you press this button it will tell you that 

the reboot may take up to 20 seconds (see Figure 6.6).