WebGate DS412 User Manual

Manual is about: CCTV digital video recorder

Summary of DS412

  • Page 1

    User manual v0.4 edvr ds412 webgate inc. 1 / 1 fcc compliance statement caution : any changes or modifications in construction of this device which are not expressly approved the party responsible for compliance could void the user's authority to operate the equipment. Note : this equipment has been...

  • Page 2

    User manual v0.4 edvr ds412 important notice 1. When using ds412, do not put heavy monitor or others on ds412. 2. Ds412 is indoor use and all the communication wirings are limited to inside of building. Therefore you should consider environmental specifications that are included in the manual. For d...

  • Page 3

    User manual v0.4 edvr ds412 edvr manual version : 0.4 making date : january, 28, 2003 revision date : february, 25, 2003 1. Install & run 1.1. Descriptions a. Front panel ieee1394 usb 1 2 3 5 6 4 7 1 2 3 4 8 9 0 +10 enter menu exit help webgate alarm digital video recoder ax-100l function selection ...

  • Page 4

    User manual v0.4 edvr ds412 - search : to search the recorded image in playback mode (5) direction/replaying button - menu : to set ptz and configuration menu - enter : to confirm the selected menu - help : - exit : to exit form the selected menu - arrow key : replay function or menu moving function...

  • Page 5

    User manual v0.4 edvr ds412 1.2. Connect device a. Connect video b. Connect monitor c. Connect ethernet d. Connect audio e. Connect power & run 2. Monitor it is to monitor real time image. Ch. 1~4 are for analogue image input via bnc cable, and ch. 5~16 are for digital image input of network camera ...

  • Page 6

    User manual v0.4 edvr ds412 (1) press the [multi] button for viewing several channels simultaneously. Ed in due order. Els 1 . View all channels with automatic converting r automatically with using the [seq] button. Configured ‘auto (4) are smaller than number of current split screen, seq function w...

  • Page 7

    User manual v0.4 edvr ds412 (5) press the [menu] button. (6) ptz menu (pan/tilt, zoom/focus, preset, preset save) shows. S’, [up/down] arrow key is for ‘tilt/focus’ (9) shows. Reset shows. . View network camera’s image input of network cameras (webeye series, i-rec series). . Playback recorded image...

  • Page 8

    User manual v0.4 edvr ds412 (3) ▌▌ (pause) : to pause replaying er pressing the button, replaying speed increases gradually (5) d) : whenever pressing the button, reverse replaying speed increases (6) sing [ ► , replay] or [►►, fast forward] button from (7) ewind] button from pause status, image is ...

  • Page 9

    User manual v0.4 edvr ds412 (3) the matching point between horizontal and vertical bar is selecting value. N order to select (5) er to confirm the selected value. . Camera setting (ch1 – ch4) input ideo input are same like picture above. -menu. Ressing [enter] key. F dvr. N - using ◄◄ button or ►► b...

  • Page 10

    User manual v0.4 edvr ds412 2) network menu - refresh: if selecting it, all local cameras are listed up. If using this menu, it is needless to enter each local camera’s ip address manually in “login” menu. D. Normal recording * there are four types (weekday day/weekday night/weekend day/weekend nigh...

  • Page 11

    User manual v0.4 edvr ds412 f. Relay * there are four types(weekday day/weekday night/weekend day/weekend night). - setup: it can be set from relay1 to relay4. It is for sending digital output signal in case of alarm triggered event(md or sensor). - special time: it is for setting in ‘special time’ ...

  • Page 12

    User manual v0.4 edvr ds412 4) security - user password: it is to set user’s password only for monitoring and playback. - admin password: it is to set admin’s password for all controlling. - remote setup: if setting as “enable”, user can set dvr with specific s/w in remote site via network. - remote...

  • Page 13

    User manual v0.4 edvr ds412 6)-3 server - monitoring port/playback port: dvr use 8001 port as monitoring port and 8105 port as playback port. When selecting one for changing, the related dialogue box is indicated. - firewall/port: when using firewall, set is as ‘yes’ and enter its port. 7) serial se...