WebGate DS412 User Manual - page 6
User Manual V0.4
eDVR DS412
(1) Press the [MULTI] button for viewing several channels simultaneously.
ed in due order.
els 1
. View all channels with automatic converting
r automatically with using the [SEQ] button.
configured ‘Auto
(4)
are smaller than number of current split screen, SEQ function will not run.
. View an alarm triggered channel
function in menu.
ps up automatically.
utomatically. For example,
(4)
. View extended image
can be viewed with [ZOOM] button from ‘Full screen’ mode.
wice size.
the center of screen. And it can move each 10
th
step to left
(5)
.
nction is cancelled.
. View with connecting PTZ
is connected to eDVR and “Serial Conf.” is set in menu, PTZ can be
(2)
ELECT] button in monitor mode.
tton.
(2) Whenever pressing the [MULTI] button, 4-9-16-13 split screens are chang
(3) In quad-split mode, images of channels 1 to 4 show. Channels 1 to 9 in 9-split mode, chann
to 16 in 16-split mode, and channels 1 to 12 in 13-split mode.
D
(1) All channels can be viewed in due orde
(2) Press the [SEQ] button from current multi screen (except 16/13-split screen).
(3) Show [SEQ] mode in the right of screen and sequential images as much as the
SW Interval’ value.
If connected channels
(5) Set ‘Auto SW Interval’ value in menu. Default value is 3 seconds.
(6) To shut down [SEQ] function, press the [SEQ] button.
E
(1) Set ‘Alarm Pop-up Screen’
(2) When alarm is triggered, the related channel po
(3) According to alarm triggered channel number, a split screen shows a
if alarm triggered channels are three, the images show in quad-split screen.
Show type of alarm trigger in the left of screen.
F
(1) Extended image
(2) Press the [ZOOM] button.
(3) Extended image shows by t
(4) Default place of extended image is on
and right and 4
th
to up and down.
To move it, use the [Arrow] button
(6) If repress the [ZOOM] button, the fu
G
(1) When PTZ controller
controlled.
Press the [S
(3) Channel selection menu shows.
(4) Select a channel with [Arrow] bu
WEBGATE INC.
6 / 6