WebGate DS412 User Manual - page 12
User Manual V0.4
eDVR DS412
4) Security
-
User Password: It is to set User’s Password only for monitoring and playback.
-
Admin Password: It is to set Admin’s Password for all controlling.
- Remote Setup: If setting as “Enable”, user can set DVR with specific S/W in remote site via
network.
-
Remote DIO: It is to set DIO menu in remote site.
5) Disk Setup
-
Auto Del. Normal: When HDD is full of recorded data, they can be deleted automatically except
alarm-triggered data.
-
Auto Del. Alarm: If setting it, alarm-triggered data will be also deleted in case of being full.
-
Alarm Partition: DVR recognizes all connected HDDs as one. It is to set percentage of HDDs for
alarm recording range within HDDs’ total sizes.
-
Backup Reminder: It is to set backup information showing according to EveryDay, EveryWeek,
or EveryMonth.
- Day/Time: According to setting values of “Backup Reminder”, setting ranges are indicated
differently.
6) Network
6)-1: Network
- Type: It is to set connected network line(Ethernet/xDSL).
- DHCP: It is to set DHCP using or not.
- Network information setting: It is to set IP address, Netmask, Gateway, or DNS server’s IP
address.
6)-2 xDSL
- User ID/Password: When DVR is connected to xDSL, access ID and Password should be
entered.
- WRS Interval/URL/Group: It is to set server registering interval, server’s URL, or configured
group ID.
- Status: It shows xDSL’s accessing status.
* Currently(25, February), eDVR supports only Ethernet, not xDSL. After upgrading xDSL function,
WebGate will let you know it instantly.
WEBGATE INC.
12 / 12