WebGate DS412 User Manual - page 11
User Manual V0.4
eDVR DS412
F. Relay
* There are four types(Weekday Day/Weekday Night/Weekend Day/Weekend Night).
-
Setup: It can be set from Relay1 to Relay4. It is for sending digital output signal in case of alarm
triggered event(MD or Sensor).
-
Special Time: It is for setting in ‘Special Time’ zone.
G. Monitor
-
Auto Sequence: It is for setting auto sequence cycle in monitoring mode. Its maximal value is 60
seconds.
-
Alarm Pop-up: It is for setting automatic video pop-up, when alarm is triggered.
-
Pop-up Hold: It is for setting pop-up image’s duration among 5/6/7/8/9/10 seconds/Keep.
H. System
1) Audio
-
Recording: It is to set whether audio is recorded or not.
-
Level: It can be set between –7 and +8.
-
+20dB: It is for amplifying audio input signal against low input level.
-
Video Link: It is to link with replayed video channel.
2) Time
-
Date/Time: It is to set Date and Time.
-
Date Format: It is set one between “MM/DD/YYYY” and “YYYY/ MM/DD”.
-
Weekday Start/End: It is to set a range of “Weekday”. The other range will be “Weekend”.
-
Day Start/End: It is to set a range of “Day”. The other range will be “Night”.
-
Daylight Saving: It is to set daylight saving. If it set as “On”, time will be changed automatically
in related period.
-
Time Zone: It is to set time zone.
- Set time: To set a value, another menu has only to exit from the related menu. But for setting
time, user should certainly press this button.
3) Special Time
- It is to set maximal four zones as “Special Time”.
WEBGATE INC.
11 / 11