WebGate DS412 User Manual - page 13
User Manual V0.4
eDVR DS412
6)-3 Server
- Monitoring Port/Playback Port: DVR use 8001 port as Monitoring port and 8105 port as
Playback port. When selecting one for changing, the related dialogue box is indicated.
- Firewall/Port: When using Firewall, set is as ‘Yes’ and enter its port.
7) Serial Setup
* There are two RS232 menus (One is for external device via DB-9 pin, and the other is for PTZ
setting) and RS 422/485 menu.
-
Device: It is to set a connected external device.
-
Baud rate/Parity/Stop bit/Data bit: Each value should be set normally according to a connected
external device.
8) Miscellaneous
-
Remote Control ID: Total sixteen remote control IDs can be set. So with this seeing, maximal
sixteen DVRs can be controlled with one remote controller.
-
DVR ID: It shows in specific DVR manager S/W in order to manage several DVRs easily.
-
Factory Setting: It is for factory setting.
I. Utility
1) Disk Manager
-
A connected HDD is detected automatically.
-
Action: Set one among “Add/Remove/Format/Confirm Removed”.
-
Select Disk: It is to select a setting Disk.
-
Type: There are several kinds of indicating words.
[?] : It shows a detected HDD’s status before formatting
[*] : It shows a added HDD’s status before formatting
[R] : It shows a using HDD’s status after formatting
[X] : It shows a not-detected HDD’s status that is used previously.
2) Disk Backup
-
Start Date/End Date: It is to set backup range.
-
Select Disk: The connected backup HDD is detected automatically. At first, backup HDD should
be added and formatted in “Disk Manager” menu.
WEBGATE INC.
13 / 13