WEG SSW-08 User Manual - page 12
2
General Information
SSW-08 | 7
2.4 RECEIVING AND STORAGE
The Soft-Starter SSW-08 is supplied in a cardboard box. On the outside of the package there
is an identification plate which is identical to the one placed on the Soft-Starter SSW-08.
To open the package:
1- Put it on a table;
2- Open the package;
3- Take out the Soft-Starter.
Check if:
The Identification plate of the Soft-Starter SSW-08 matches the model purchased:
Damage has occurred during transport. If so, contact the carrier immediately.
If the Soft-Starter SSW-08 is not installed immediately, store it in its package in a clean and
dry place with temperature between -25 °C (-13 °F) and 65 °C (149 °F). 1 hour at -40 °C (-40 °F)
is permitted.
Table 2.1: Dimensions of the package in mm (in)
SSW-08
Model
Height
H
mm
(in)
Width
L
mm
(in)
Depth
P
mm
(in)
Volume
cm
3
(in
3
)
Weight
kg
(lb)
17 A
24 A
30 A
221
(8.70)
180
(7.09)
145
(5.71)
5768
(352.2)
1.65
(3.64)
45 A
61 A
85 A
260
(10.24)
198
(7.80)
245
(9.65)
12613
(770.8)
3.82
(8.42)
130 A
171 A
200 A
356
(14.02)
273
(10.75)
295
(11.61)
28670
(1750)
8.36
(18.43)
255 A
312 A
365 A
412 A
415
(16.34)
265
(10.43)
320
(12.6)
35192
(2147)
10.5
(23.2)
Figure 2.5: Dimensions of the package