ATTACHING WEIGHTS TO THE WEIGHT CARRIAGE
To use the Weight Carriage (10), slide the desired
amount of weight (not included) onto each side of the
weight tube on the Weight Carriage. Secure the
weight with the two Weight Pins (37).
To use Olympic weights, press two Adapter Bushings
(44) into the ends of each Weight Adapter (23). Slide
a Weight Adapter onto each side of the weight tube
on the Weight Carriage (10).
17
37
66
23
10
23
Weight
Tube
65
37
WARNING:
Do not place more than
68 kg (150 lbs.) on the Weight Carriage (10).
Always place the same amount of weight on
each side of the Weight Carriage.
ATTACHING WEIGHTS TO THE LEG LEVER
To use the Leg Lever (66), slide the desired amount
of weight (not included) onto the Weight Tube (65)
and secure it with the Weight Pin (37).
To use Olympic weights, slide the Weight Adapter
(23) onto the Weight Tube (65).
WARNING:
Do not place more than
68 kg (150 lbs.) on the Weight Tube (65).
31
30
73
ATTACHING THE LAT BAR TO THE HIGH PULLEY
STATION OR THE LOW PULLEY STATION
To use the high or low pulley station, attach the Lat
Bar (73) to the High Cable (31) or the Low Cable (not
shown) using a Cable Clip (30). The Row Bar (not
shown) can be attached in the same manner.
WARNING:
Always remove the Lat
Bar (73) when performing an exercise that does
not require the use of the Lat Bar.
22
1
2
22
STORING WEIGHTS
To store weights, slide them onto the Storage Tubes
(22) on the Right and Left Bases (1, 2).