Wood Stone DESIGNER SERIES 6348 WS-DS1-4048 Installation and operation manual - page 8
Designer Series 1 w/ Broiler Option
Installation and Operation Manual
An ongoing program of product improvement may require us to change
specifications without notice.
Designer Series-1 w/ Broiler Option,
Revised November 2014. Doc no: M0078.00
info@woodstone-corp.com
or visit
woodstone-corp.com
Wood Stone Corporation
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
Toll Free 800.988.8103
Tel 360.650.1111
Fax 360.650.1166
8
MOVING THE OVEN
LIFTING THE OVEN – 6,000 LBS. FORKLIFT REQUIRED
The Wood Stone Designer Series 7248 oven weighs approximately 4,500 lbs The oven may be moved using a forklift using the
forklift pockets provided at the front and rear of the unit The oven may also be moved using a pallet jack If the oven is to be
installed against a wall, you may need to leave access to the back of the oven to complete the utility connections
CAUTION:
These ovens are extremely heavy If using a pallet jack to move the oven DO NOT ATTEMPT to move the oven over
anything but a smooth flat surface Attempting to move the oven with a pallet jack over anything but a smooth flat surface could
cause the oven to tip over resulting in potential serious injury, damage to the oven and property damage
IF YOU ARE PLANNING TO USE A CRANE TO UNLOAD THE OVEN,
PLEASE SPECIFY A FLATBED TRUCK DELIVERY!
NOTE:
This is a general example of forklift
pockets Forklift pocket locations may vary
as Designer Series ovens are custom built
Side forklift pockets
DELIVERY NOTE:
The customer will receive an Oven Shipping Notification when the oven leaves the Wood Stone factory This
will include a PRO# and a trucking company contact number Wood Stone recommends that you confirm the delivery date/time
with the trucking company before committing to heavy equipment and/or labor Our goal is a smooth and safe delivery
DO NOT TURN THE OVEN ON ITS SIDE!
Moving a Wood Stone oven can present interesting challenges
to even the most experienced riggers Make sure to secure the
proper equipment and make safety your first priority Please
don’t hesitate to call the factory for technical support