Woosh Aspen X Assembly Manual - page 7
of
12
Step 6 - Pedals
The pedals are designed to fit on a specific side of the bike,
do NOT attempt to fit the pedals without first checking which
side of the bike the pedal is meant for. To identify which
pedal goes on which side. The ‘R’ and ‘L’ indicates which
side of the bike the pedal should be fitted to.
Fit each pedal into position and hand tighten. Once each
pedal has been tightened nearly all the way in by hand, use
the 15mm spanner to fully secure the pedals in place.
Note: turn the left pedal counter-clockwise to tighten.