Woosh Aspen X Assembly Manual - page 8
of
12
Step 8 – Front Mudguard
Remove the packaging from the mudguard if you haven’t
already done so.
Remove the nut from the bolt just behind the front brake as-
sembly, this also secures the light, so be careful not to let the
light fall. The metal tag of the mudguard needs to be fitted
between the front light fixing and the bike frame as shown
below. Finger tighten the nut back into position.
Before fitting the silver arms to the bike, you will need to re-
move the supplied nut/bolt from the bike and discard them,
and instead use the nylon spacer(s) and bolt shown below.