Worx WG303E Safety And Operating Manual - Chain Saw
18
Chain Saw
WG303E
If the chain bar is worn out or damaged, take the chain
tensioning catch off the bar by loosing the screw anti-
clockwise. Then fit the tensioning catch into the new bar
by tightening the screw clockwise. The catch protrude (a)
must be fitted into the bar hole. (See Fig M)
Sharpening Chain
Have your chain sharpened professionally at your
approved service agent or sharpen the chain yourself
using the sharpening kit. Follow the sharpening
instructions supplied with the sharpening kit.
CLEANING/STORAGE
Clean the moulded plastic housing of the chain saw
using a soft brush and clean cloth. Do not use water,
solvents or polishes. Remove all debris, especially
from the motor cooling vents.
Remove and brush clean the cover plate, chain and
chain bar after 1 to 3 hours of use. Clean the area
under the cover plate, the drive sprocket and chain bar
assembly using a soft brush. Clean oil outlet with a
clean cloth.
If the chain saw is to be stored for a longer period of
time, clean chain and chain bar.
Store in a secure, dry place out of the reach of children.
Do not place other objects on the chain saw.
To prevent leakage ensure machine is left in a horizontal
position (oil filler cap 4 uppermost).
When storing machine in original packaging the oil tank
must be completely emptied.
M
b