Worx WG303E Safety And Operating Manual - Plug Replacement
PLUG REPLACEMENT
(ONLY FOR REWIRABLE
PLUG OF UK & IRELAND)
If you need to replace the fitted plug then
follow the instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
Blue – Neutral
Brown – Live
As the colors of the wires in the mains lead of
this appliance may not correspond with the
coloured markings identifying the terminals
in your plug, proceed as follows. The wire
which is coloured blue must be connected to
the terminal which is marked with N. The wire
which is coloured brown must be connected to
the terminal which is marked with L.
WARNING: Never connect live or neutral
wires to the earth terminal of the plug. Only
fit an approved 13ABS1363/A plug and the
correct rated fuse.
NOTE: If a moulded plug is fitted and has to
be removed take great care in disposing of the
plug and severed cable, it must be destroyed
to prevent engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
Cable grip
Brown L (live)
13 Amp fuse approved
to BS1362
DECLARATION OF
CONFORMITY
We,
Positec Power Tools (Europe) Ltd, PO Box 152,
Leeds, LS10 9DS, UK
Declare that the product,
Description
WORX Chain saw
Type WG303E (3-designation of
machinery, representative of Chain Saw)
Complies with the following Directives,
2006/42/EC, 2004/108/EC, 2011/65/EU,
2000/14/EC amended by 2005/88/EC
The notified body involved
Name: Intertek Deutschland GmbH
(Notified body 0905)
Address: Stangenstraße 1, 70771
LEINFELDEN-ECHTERDINGEN
Certification No.: 09SHW3034-04
2000/14/EC amended by 2005/88/EC
– Conformity assessment procedure as per
Annex V
– Measured Sound Power Level 105 dB (A)
– Declared Guaranteed Sound Power Level
108 dB (A)
Standards conform to:
EN 60745-1, EN 60745-2-13, EN ISO
3744, EN 55014-1, EN 55014-2, EN
61000-3-2, EN 61000-3-3
The person authorized to compile the technical
file,
Name Russell Nicholson
Address Positec Power Tools (Europe)
Ltd, PO Box 152, Leeds, LS10 9DS, UK
Suzhou 2015/12/08
Allen Ding
Deputy Chief Engineer, Testing & Certification