X-Pulse XP1000.5 Installation & Operating Manual - Checking The Set Contents
20
!
!
■ All filtering sections are additionally equipped
with an adjustable Q-factor control (Q - 0,50 to Q =
1,33) The Q-factor control allows the fine-tuning of
the individual speakers used. Depending on the
individual requirements it is possible to either give
the subwoofer a 'slimmer' or 'fatter' sound. It is
e.g. on the one hand also possible to increase the
power handling stability of a small satellite system.
Or on the other hand to 'give' a satellite more
'kick'.
A bridging module for 3-channel operation
(2 x 100 W RMS + 1 x 500 W RMS) and a range
of vehicle specific pre-set parametrica equali-
zer modules are also available as optional
accessories for the XP1000.5.
Therefore the multiple level, frequency and
Q-factor controls (and the accessory modules)
offer the possibility of individually optimal
amplifier/satellite/subwoofer matching and
perfect sound-tuning. The XP1000.5 concept
offers you the key to genuine high-end audio in
your car!
The XP1000.5 offers numerous features and
controlling options usually not available with
comparable amplifiers. It is therefore also a
relatively komplex audio component. To enjoy
the full possibilities of this truly exceptional
concept amplifier and in order to maximize
the performance of your complete car audio
system, we recommend that you acquaint
yourself thoroughly with its full capabilities
and features. Therefore, please read this
manual carefully before undertaking the
installation of this amplifier and please retain
this manual and your purchasing and
installation receipts for future reference.
The standard version of XP1000.5 concept
amplifier is intended to be used with a head-
unit featuring 3 pairs of fullrange pre-outs
(Front, Rear, Sub). If the head-unit only has one
RCA sub pre-out' a Y-adaptor may be used to
'double' the sub pre-out. In case of two pairs
of pre-outs only (Front and Rear), one pair of
RCAs may be 'doubled' by way of two
Y-adaptors. In case of any other combination
requested, please consult your X-PULSE
dealer.
In case you are installing your XP1000.5 ampli-
fier yourself, it is recommended to have your
installation checked by an authorized, profes-
sional X-PULSE dealer/installer in order to
quality for full warranty protection and to
reach the maximum power and audio perfor-
mance possible with your individual automoti-
ve audio system.
CHECKING THE SET CONTENTS
Please check the set contents of your new
XP1000.5 5-Channel Concept Power Amplifier
carefully. The original packaging should con-
tain:
■
XP1000.5 5-Channel Digital/Analog
Power Amplifier
■
X-PULSE 5/6-Channel Symmetry Converter
with Integrated Remote Output
■
50 cm X-PULSE 5/6-Channel RCA (plus
REMOTE lead) Adaptor Cable for Symmetry
Converter input
■
2 x 5 m Mini-DIN Interconnect Cable
for balanced 5-channel signal transfer
(incl. REMOTE switching)
■
Installation Accessory Set with
4 Self-Tapping Screws (large) for amplifier
mounting
4 Rubber Grommets for insulated amplifier
mounting
2 Self-Tapping Screws (small) for Symmetry
Converter mounting
2 Allen Wrench Keys for M3 and M6 inside
hex-head screws
■
Installation & Operation Manual with
Guarantee Card
In case any of these parts are missing or show
signs of transport damage, please contact your
X-PULSE dealer immediately.
230998 Man XP1000.5 RZ (D+UK) 14.10.1998 9:37 Uhr Seite 20