________________________________________ maintenance 8-1 chapter 8 - maintenance chapter overview handling the printer moving the printer cleaning the printer cleaning the exterior cleaning the anti-static teeth cleaning the transfer guide area consumable parts.
8-2 maintenance bb _______________________________________ notes.
________________________________________ maintenance 8-3 introduction your accel-a-writer 812 is designed for minimal maintenance. The basic requirements for keeping the printer in good working order involves little more than handling it with care and cleaning it occasionally. This chapter covers th...
8-4 maintenance bb _______________________________________ • make sure that the printer’s air vents are not covered and that the air can move freely around those areas. Also, never insert anything into the vents. • make sure the output tray does not overfill. Overfilling can block media as it comes ...
________________________________________ maintenance 8-5 moving the printer if you move the printer farther than just across a table or room, you need to do several things to protect it. Before moving the printer: • remove the toner cartridge and place it in the bag in which it was shipped to protec...
8-6 maintenance bb _______________________________________ 2. Wipe the exterior with a soft, lint-free, clean cloth dampened with a neutral (without abrasives, ammonia, or chlorine) detergent. Caution: never use ammonia-based cleaners on or around the printer. This may cause permanent damage to the ...
________________________________________ maintenance 8-7 2. Open the top cover by pressing the raised finger grips and lifting up and back approximately 180˚ (fig. 8.1). Online form feed tray select enter menu reset test data manual ready fig. 8.1 open the top cover 3. Remove the toner cartridge. (s...
8-8 maintenance bb _______________________________________ 4. Clean any paper dust or paper residue from the anti-static teeth using the following procedure: a. Locate and remove the green cleaning brush inside the right side of the printer (fig. 8.2). B. Locate the anti-static teeth and slide the c...
________________________________________ maintenance 8-9 cleaning the transfer guide area you should clean the transfer guide area when you change the toner cartridge or if you notice a deterioration in print quality. 1. Turn the printer off. 2. Open the top cover by pressing the raised finger grips...
8-10 maintenance bb _______________________________________ consumable parts we recommend that any service performed on your accel-a-writer 812 be provided through xantÉ customer service while the printer is under warranty. After the initial warranty period, you have the option of purchasing an exte...
________________________________________ maintenance 8-11 if you do not purchase a maintenance contract and send the printer to xantÉ for work covered under the limited warranty during the first year, you only pay shipping costs to xantÉ (one way). After the first year, if you do not purchase the ma...
8-12 maintenance bb _______________________________________.
