Xante Accel-a-Writer 8200 Troubleshooting Manual - page 10
10-10 Troubleshooting
bb
____________________________________
OFFLINE
The printer is off line which means it is
not ready to receive and process data.
PAPER JAM
A media jam has occurred along the
paper path. Clear the jam using the
procedure in “Clearing Jams” earlier in
this chapter.
PAPER OUT
Either the cassette is pulled out, the
selected media source is out of paper, or
trays have different size media loaded
when tray chaining is selected. Push the
cassette in, fill the current media
cassette or tray, or make sure the same
size media is in both cassettes when
chaining.
PRINTER OPEN
The printer is not closed completely.
Make sure the front cover and
output tray are closed completely.
PROCESSING
The printer is processing a job, getting it
ready to print.
READY/IDLE
The printer is on line and ready to
accept a print job.
READY/PRINTING
The printer is completing a print job and
ready to accept a new job to begin
processing.
RESET TO STOP
The printer has been taken off line
during an active job.
RESETTING JOB
The printer is resetting after the Reset
↑
key has been pressed and an active job
has been cancelled.
TEST PRINT
The printer is printing a test page when
the printer is off line and not working
within the menu structure.