XENO XDR960 User Manual - 7.6 Acs Setup
User’s Manual | 104
7.6 ACS Setup
The ACS Setup menu allows you to adjust the software’s settings such as: Device Registration, Network, User, Display, Event
and other options.
7.6.1 DVR Registration
Add, Modify, Import, Export or Remove DVRs from the site List.
1.
To add a DVR, click ‘Add’ button, and input all required information
If a DVR is set
to UPNP, it can be automatically detected by using the ‘Search’ button. The DVR must be on the same
network as the ACS to be able to be detected. Once the new DVR is added, it will automatically appear on the site panel.
No.
Function
Description
1
Name
The name of the site.
2
IP
IP Address.
3
Search
Search the DEVICE sites in the same local network. (UPnP function)
4
Port
Port of the site. (Default: 9010)
5
Web port
Web Port of the site. (Default: 80)
6
ID
User ID of the site.
7
Password
Password of the site.
8
Channel
Number of channel of the site. For example: 16ch DEVICE: 1-16 or specifically: 1,3,5,7,9...
9
Model
Select a DEVICE or DEVICE’s model name.
10
Aspect Ratio
Select the displayed Aspect Ratio. (Custom, 1:1, 4:3, 16:9)
2. To modify
and/ or remove a DVR’s information, check the box next to the device you want to change, and click EDIT or
REMOVE to make any modifications to the DVR’s information or delete it from the Device List.
3.
Use the ‘Import’ and ‘Export’ buttons to export settings from one DVR and import them to multiple DVRs on the list. Please
note that all DVRs must have the same firmware version to be able to accept exported settings.