XENO XDR960 User Manual - page 39
39 | H.264 Digital Video Recorder
4.1.5 Factory Default
With an authorized password, users can get the system back to factory default configuration.
4.1.6 Face Stamp Set-up
The FaceStamp is an exclusive Digital Watchdog feature used for employee and time amangement. It is compatible only with
Digital Watchdog’s VMAX960H series.
If you have purchased the Facestamp hardware, follow the instructions below on setting up the Facestamp on the DVR.
Consult the Facestamp’s QSG for additional installation information.
1.
Connect the FACE STAMP hardware to the DVR using an RS-
485 cable. Connect the cable to the DVR’s KEYBOARD
RS-485 port. See 2.2 Rear Panel for more information.
2.
Go to System Setup System Info sub-menu
3.
Select ‘FACE STAMP’ in the Keyboard options from the drop-down menu.
4.
Adjust the Baudrate to 38400
5.
Adjust the Keyboard ID to 252 or 250.
N
OTE
Upon clicking
“Start” button and entering the admin password, all the configuration values made by the
user will be deleted. The system setting will be sent to factory defaults. The recorded video data will not be
erased.