XENO XDR960 User Manual - page 27
27 | H.264 Digital Video Recorder
3.7 Search Recording Image
3.7.1 Date/Time Search
To search your recorded data by date/ time, follow one of the options below:
1.
Click the quick Menu button at the left side of the menu bar, select Search Date/ Time
2.
Right-click anywhere on the screen, select Search Date/ Time
The calendar window will appear, Days with recorded data available will be indicated in RED.
1.
Select from the calendar the date.
If necessary, use the manual year
and month options on the left side
to adjust the calendar view.
2.
The ‘Intelli-Search Bar’ at the
bottom of the window will display
hours when recorde data is
availablein color code. Once the
recorded video data of the
selected date is shown, user can
adjust the vertical search line to
the time that user wants to search
by dragging a mouse. As the
vertical line is moving back and
forth, user can see “the Search
time” clock is also changing. When
user decides the Search time, click
Play to see the selected video
data.
3.
The colors of the time bar are different, depending on the recording mode.
No color - NONE- Camera has no recorded data for the selected time.
Red- Panic recording- recording triggered by the user when pressing the Instant/ Panic Recoreding.
Yellow- Continuous recording.
Green- Motion recording- The system records only when motion is detected.
Orange- Sensor recording- The system records when a sensor is triggered and only during the dwell time as set in
“SENSOR” of the “DEVICE” menu. If “SENSOR” is disabled under the “DEVICE” menu, and recording
schedule is set to “SENSOR”, the system will not record even though a sensor is triggered.
Blue-
“Continuous” + “Motion”-The system records continuously and will switch to the motion recording configuration if
motion is detected in the
motion area. The system will also send a “motion event” message to the Pivot Client
Software over the network. If “MOTION ALARM” is disabled in the “DEVICE” menu, and recording is set to
“CONT + MOT”, the system will record with continuous recording even when motion is detected in motion
area.
Orange-
“Continuous” + “Sensor”- The system records continuously and will switch sensor recording if a sensor is
triggered during dwell time. The system will also send a “sensor event” message to the Pivot Client Software
1
2
3
4
5